High Bulk TFO

Textile Machineries

Home | Product
Download PDF

High Bulk TFO

 

 

Machine Features :

JC-6 HBY machine has been designed for continuous twisting and heat setting of Polyester or Polyamide (Nylon) yarn. Crimp in the yarn is set at a controlled temperature and at almost Zero Yarn Tension. This yarn is soft wound on a package suitable for dyeing. Up to down yarn path ensures uniform stretch in the yarn and minimum tension during winding making the package with best possible softness. This machine is supplied with spindle pot dia of 150 and 175 mm so as to accommodate the package produced on the Texturising machine. Bigger spindles can also be supplied on request. Machine is equipped with separate drives for spindles and various shafts, servo drive for traverse mechanism. All these are synchronized and controlled thru PLC. Machine parameters and operations are controlled with the help of touch screen HMI which is operator friendly. No need to change any pulleys or gears to achieve the desired quality results.
 
 

Technical Specifications :

SPINDLES        
No. of Spindles / Machine   : 42 –  6 – 144
No. of Spindles / Section   : 6  
Spindle Pot Dia mm : 150 / 175
Maximum Spindle Speed (Mech.) RPM : 12,000 / 11,000
Denier Range   : 75 to  600
Twist Range TPM : 60 to 1000
Spindle Drive   : Tangential Belt
         
FEED PACKAGE        
       
Maximum Tube Length mm : 290
Minimum Inside Diameter mm : 45  
Maximum Package Diameter mm : 160  / 180
Maximum Package Weight Kgs : 2.5 / 3.5
HEATER        
Heater Length mm : 230
Shrinkage Inside Heater % : 15 %  - 65%
Temperature Range   : 50O  C  - 250O  C
Installed Power   : 2.1 to 7.2 K.W.
Average Consumption   : 1.2 to 4.2 K.W.
TAKE-UP PACKAGE        
         
Traverse mm : 200  
Tube / Cone – Length mm : 230  
Maximum Outside Dia mm : 260  
Weight Kgs : 0.8 to 2.5
Max. Yarn Take-up Speed MPM : 250  
Control Panel     :   Electronic with A C Drives, Servo Drive, PLC, HMI etc.
DRIVE / CONNECTED LOAD          
Spindle Drive   : 1 Motor (7.5 to 20 H.P.) with A C Drive
Input Roller Drive   :   1 Motor 3 H.P. with A C Drive
Output Roller Drive   :   1 Motor 3 H.P. with A C Drive
Take-Up Drum Drive   :   1 Motor 3 H.P. with A C Drive
Traverse Mechanism   :   1 Servo Motor ( 1 to 3 K.W.) with Servo Drive
MACHINE DIMENSIONS          
Total Length Mm :   9530  -  910 -  25000
Total Width Mm :   900
Total Height Mm :   1975